skip to main |
skip to sidebar
Publié par
AFFI
|
A little-known fact about the Web is how easy it is to set up your own website. Instead of paying someone to host your website or using an ad-supported provider, you can host it yourself. Though it takes more time to set up, it has the advantages of being free and more flexible than other solutions. These are instructions for Windows operating systems. On other operating systems, steps may vary.
Steps
1
Open start-Click Run-type cmd-press OK- type ipconfig/all-press enter.2
Write down the shown IP address,subnet mask,default gateway and DNS servers. You will need them for later.3
Open up the network connections folder.4
Right click the internet connection you use and select properties.5
Scroll through that menu until you see Internet protocol. Highlight it and click properties.6
Click use the following IP address. If it is already checked, you do not need to continue until step 10.7
Next enter the info you copied down, but the last digit of the IP address should be different than the one you copied down.8
Click OK.9
If you get a message saying IP address is already in the network, choose a different last number.10
Try connecting to the internet. Did it work? If it didn't work, contact your Internet Service Provider. Because this problem is the DNS servers. They will be able to tell you which DNS servers to use.11
You have completed the first step which is to setup a static IP address. Please note: This usually requires a router to do. The reason being, you are just giving your router a static IP. If you do not have a router, you need to pay for a static IP from your ISP, or sign up for a free static DNS service. (This article doesn't really provide much help with hosting a site without a static IP address.)12
Download Wampserver. Wampserver is good because it contains apache and automatically configures itself. Note: During installation it will ask for a server name. type "localhost" for the server name. You must type it exactly as shown here, but do not include the quotes. When asked for an email address, enter your email address.13
To use Wampserver, create a folder in the www directory and save the files for your site in that folder.14
The address for your site will be: yourstaticipaddress/yourfolderinthewwwdirectory/. Except if you signed up for a static DNS service.15
Register a domain name and point it to the address to your site.
Warnings
- Your website will only be available when your computer is on and your internet connection is working.
- Your connection's upload speed is probably slower than its download speed, so your website might be slow. On some routers, there are options available to modify the transfer data limit. By setting the upload/download speeds equal, you will be able to upload at the same download speed. Note: Do not set your upload limit too high, as you may slow your download connection (or completely stop), making it difficult and lengthly to reset settings. Only recommended for experienced users.
- These instructions change depending on the kind of connection you have.
0 commentaires:
Enregistrer un commentaire